BJZKV - GASKET REPLACER 910
- MSDS: BJZKV
- Manufacturer: HERNON MANUFACTURING INC
- Product Name: GASKET REPLACER 910
- National Stock Number: 8030-01-137-6964
Product Identification
Product ID:GASKET REPLACER 910
MSDS Date:02/01/1989
FSC:8030
NIIN:01-137-6964
MSDS Number: BJZKV
Responsible Party
BROOKLYN, NY 11208
US
Emergency Phone: 718-649-3000
Info Phone: 718-649-3000
Cage: DO346
Contractor
Telephone: 718-649-3000
Cage: DO346
Ingredients
POLYGLYCOL DIMETHACRYLATES
Fraction By Weight: 20-30%
POLYURETHANE METHACRYLATE
Fraction By Weight: 45-55%
ACRYLIC ACID (SARA III)
CAS: 79-10-7
RTECS: AS4375000
Fraction By Weight: 4-6%
OSHA PEL S, 10 PPM
ACGIH TLV: S, 2 PPM; 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
SILICA, CRYSTALLINE - FUSED
CAS: 60676-86-0
RTECS: VV7328000
Fraction By Weight: 6-8%
OSHA PEL SEE TABLE Z3
ACGIH TLV: 0.1 MG/M3 RDUST;9293
SULFUMIDE
Fraction By Weight: <1%
1-METHYL-1-PHENYLETHYL HYDROPEROXIDE (CUMENE HYDROPEROXIDE)
CAS: 80-15-9
RTECS: MX2450000
Fraction By Weight: 3-4%
EPA Report Quantity: 10 LBS
DOT Report Quantity: 10 LBS
Hazards
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:*IN A SINGLE TEST, PURE CUMENE
HYDROPEROXIDE CAUSED TUMORS IN ONE OF THIRTY EXPERIMENTAL ANIMALS
WHEN INJECTED UNDER THE SKIN.
Explanation of Carcinogenicity:AS DEFINED BY NTP, IARC & OSHA THERE ARE
NO CARCINOGENS IN THIS FORMULATION.
Effects of Overexposure:PROLONGED EXPOSURE TO SKIN MAY CAUSE IRRITATION
TO A SENSITIVE PERSON.
Medical Cond Aggravated by Exposure:SKIN IRRITATION
First Aid
First Aid:EYE IRRITATION:WASH WITH PLENTY OF WATER FOR SEVERAL MINUTES.
GET MEDICAL ATTENTION. SKIN:WASH THOROUGHLY WITH SOAP & WATER.
INHALATION:REMOVE TO FRESH AIR. INGESTION:LOW TOXICITY. GET MEDICAL
ATTENTI ON.
Fire Fighting
Flash Point Method:TCC
Flash Point:200 F/93 C
Extinguishing Media:FOAM, DRY CHEMICAL
Fire Fighting Procedures:SELF CONTAINED BREATHING APPARATUS &
PROTECTIVE CLOTHING SHOULD BE WORN IN FIGHTING FIRES INVOLVING
CHEMICALS.
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:SOAK UP IN INERT ABSORBENT, STORE IN CLOSED
CONTAINER.
Handling
Handling and Storage Precautions:STORE BELOW 100F & AVOID PROLONGED
SKIN CONTACT.
Other Precautions:NONE
Exposure Controls
Respiratory Protection:NOT NECESSARY
Ventilation:LOCAL EXHAUST:NECESSARY. SPECIAL:NORMALLY NOT NEEDED.
MECHANICAL(GENERAL):NOT NECESSARY. OTHER:NONE
Protective Gloves:RUBBER OR PLASTIC RECOMMENDED
Eye Protection:SAFETY GLASSES RECOMMENDED
Other Protective Equipment:NONE
Work Hygienic Practices:AS REQUIRED
Supplemental Safety and Health
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:>300F,>149C
Vapor Pres:<10 @ 80F
Vapor Density:NEGLIGIBLE
Spec Gravity:1.1 @ 80F
Evaporation Rate & Reference:POLYMERIZES
Solubility in Water:LOW
Appearance and Odor:PURPLE GEL, ODOR MILD
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS & METALIC SALTS
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:NONE
Conditions to Avoid Polymerization:EXCESSIVE HEAT
Disposal
Waste Disposal Methods:INCINERATE OR BURY IN ACCORDANCE WITH LOCAL &
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.